Loading...
Loading...
Contributors:
Dataset URI:
10.5281/zenodo.11581073This repository contains the inputs and codes for calculating thermal conductivity and aerodynamic surface roughness length presented in the research paper. Codes: Functions for thermal conductivity estimations: RunThermalConductivity_allSites (to calculate CRh or CRi) -> in here choose the parameters to consider (sensor uncertainty, soil moisture, lithological properties) and the method to use (CRh or CRi) ThermalConductivity_CRh ThermalConductivity_CRi Conductivity_Brock (to calculate NYB) Calibrate_deb_par_PIR_k_z0 (calculates optimised value of k (and z0)) Functions for aerodynamic surface roughness lenght: Runz0 (main) -> in here choose the parameters (d or no d, surface temperature, sensor uncertainty, period of measurements) z0Calc Calibrate_deb_par_PIR_k_z0 -> it calibrates z0 if chosen Data: Ablation_Tower1.mat, Ablation_Tower2.mat and Ablation_Tower3.mat: Timetables containing the automatic distances measured from the ablation stake pictures in m and the calculated ablation in mm w.e. DATA_Piramide.mat: debtemp: structure containing timetables of thermistor data (°C) for the three sites, where DT1 is the closest to the surface and DT5 the closest to the ice. sm: structure containing timetables of moisture content (m3/m3) data for the three sites, where SM1 is the closest to the surface and SM3 the closest to the ice. trh: structure containing timetables of temperature (°C) and relative humidity (%) data for the three sites, where XX_1, XX_2, XX_3 and XX_4 correspond to the variables at 0.5, 1, 2 and 2.7 m above the surface. TA is the air temperature, RH is the relative humidity and DTA is the dew temperature. wind: structure containing timetables of wind speed (m/s) and direction (°) data for the three sites, where L1, L2, L3 and L4 correspond to 0.5, 1, 2 and 2.7 m above the surface and FF is the wind speed, FFmx is the maximum wind speed, FFstd is the standard deviation, and DIR is the direction. LithologyData: structure containing the density (kg/m3) and specific heat capacity (J/kg/K) for each site. SM_data: structure containing the moisture content (m3/m3) for the selected period, as well as the mean value for each site Calibration: data required to run the k and z0 calibrations with T&C
Keyword(s):
MeSH Term(s):
Grants and Funding:
Associated Publication(s):
No Associated Publication Data Available
Supplementary Data:
No Supplementary Data Available
Related Dataset(s):
No Related Dataset Data Available
The National Library of Medicine (NLM) provides information about biomedical datasets. Inclusion on an NLM Web page does not imply endorsement of, or agreement with, the contents by NLM or the National Institutes of Health. Learn more: NLM Web Policies (nih.gov)