Loading...
Loading...
Contributors:
Dataset URI:
10.5281/zenodo.23297388Combined and unfiltered logger data from radiometer measurements of global shortwave irradiance and longwave irradiance at Saint Félix (Départment 60) in the rural area to the N of Greater Paris recorded during the urbisphere Paris Campaign from 2023-02-03 00:00 to 2024-03-27 00:00 UTC. Measurements were taken on an open meadow near Musée Moulin Brosserie de Saint Félix at 49.342°N/2.28004°E. Radiometer measurements taken at PASTFE are: Global (solar) hemispherical irradiance (GHI) with an intermittently ventilated Kipp&Zonen CM11 pyranometer Longwave hemispherical irradiance (LHI) with an intermittently ventilated and Kipp&Zonen CG1 pyrgeometer The values in this dataset are calibrated using manufacturer calibrations for all instruments and no further quality controlls or gap filling procedures have been applied. For quality controlled and calibrated data use L1 data and higher instead. The two L0 datafiles (RAW_1min, MET_1min) combine all individual (uncalibrated voltage and manufacturer calibrated) logger files (automatic transfer, manual download) with a consistent and consecutive time axis. Missing data is filled with -9999. Each data file is structured with time steps as rows and parameters as column in comma-separated csv format. The columns contain readings from two radiometers and a co-located all-in-one weather station (Campbell Scientific ClimaVue50) providing barometric pressure, air temperature, humdity, wind, precipitation and also a back-up solar irradiance (low quality, photodiode). Files have 4 header lines following the Campbell Scientific Inc. TOA5 file definition. The L0 data combined all individual file transmissions files into a single .csv file covering the entire period of observations at PAWYDT. The individual logger output files (source of this dataset) can be found here: Morrison, W., Hilland, R., Looschelders, D., Zeeman, M., Grimmond, S., & Christen, A. (2024). Data from Radiometer System (RAD) measurements at Paris – Saint Félix (PASTFE) from 2023-02-03 to 2024-03-26 [RAW] (Version v1.0.2) [Dataset]. Zenodo. https://doi.org/10.5281/zenodo.13772257 File "PASTFE-MET_1min-202302030000_202403270000_UTC.csv" contains the manufacturer calibrated physical values: Column descriptions: TIMESTAMP: Time / Date of the end of the aggregation interval in UTC in format YYYY-MM-DD hh:mm:ss RECORD: Continuous internal record number MET_PYRG_LHI_Wm2_Avg: Average longwave hemispherical irradiance in W/m2 measured with an intermittently ventilated thermopile pyrgeometer (Kipp & Zonen CG1) MET_PYRG_LHI_Wm2_Std: Standard deviation of longwave hemispherical irradiance in W/m2 measured with an intermittently ventilated thermopile pyrgeometer (Kipp & Zonen CG1) MET_PYRA_GHI_Wm2_Avg: Average global (solar) hemispherical irradiance in W/m2 measured with an actively intermittently thermopile pyranometer (Kipp & Zonen CM11) MET_PYRA_GHI_Wm2_Std: Standard deviation of global (solar) hemispherical irradiance in W/m2 measured with an intermittently ventilated thermopile pyranometer (Kipp & Zonen CM11) MET_CV50_PressureActual_hPa_Avg: Actual pressure in hPa (not reduced to sea level) measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_Wind_ms_Avg: Wind velocity scalar mean in m/s measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_WindGustMax_ms_Max: Wind velocity maximum in m/s measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_Wind_ms_Vec: Wind velocity vector mean in m/s measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_WindDirection_deg_Vec: Wind direction in ° measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_AirTemperature_degC_Avg: Air temperature in °C measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_RelHumidity_percent_Avg: Relative humidity in % measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_DewPoint_degC_Avg: Dew point in °C calculated based on air temperature and relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_VapourPressure_hPa_Avg: Vapour pressure in hPa calculated based on air temperature and relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_VapPressDeficit_hPa_Avg: Vapour pressure deficit in hPa calculated based on air temperature and relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_MixingRatio_gKg_Avg: Mixing ratio in g/kg calculated based on air temperature and relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_GHI_Wm2_Avg: Average global (solar) hemispherical irradiance in W/m2 measured with a photodiode [low quality] pyranometer in the all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_Precipitation_mm_Tot: Precipitation measured with an droplet counter in the all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_LtngStrikes_cnt_Tot: Number of lightning strikes measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) MET_CV50_LtngDist_km_Avg: Average distance of lightning strikes measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) Missing data are shown with -9999. Missing data and data gaps are summarized in "PASTFE-MET_1min-202302030000_202403270000_UTC_missing_data_report.txt" File "PASTFE-RAW_1min-202302030000_202403270000_UTC.csv" contains the raw voltage and auxilliary measurements such as pyrgeometer temperature: Column descriptions: TIMESTAMP: Time / Date of the end of the aggregation interval in UTC in format YYYY-MM-DD hh:mm:ss RECORD: Continuous internal record number RAW_Cr1000_Voltage_V_Min: Minimum battery voltage measured on the CR1000X data logger RAW_Cr1000_PanelTemp_degC_Avg: Average panel temperature on the CR1000X data logger RAW_PYRG_LHI_Signal_mV_Avg: Average voltage signal of the ventilated thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_LHI_Signal_mV_Min: Min voltage signal of the ventilated thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_LHI_Signal_mV_Max: Max voltage signal of the ventilated thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_LHI_Signal_mV_Std: Standard deviation of the ventilated thermopile pyrgeometer voltage signal (Kipp & Zonen CG1) RAW_PYRG_SHI_Signal_mV_Avg: Average voltage signal of the ventilated thermopile pyranometer (Kipp & Zonen CM11) RAW_PYRG_SHI_Signal_mV_Min: Min voltage signal of the ventilated thermopile pyranometer (Kipp & Zonen CM11) RAW_PYRG_SHI_Signal_mV_Max: Max voltage signal of the ventilated thermopile pyranometer (Kipp & Zonen CM11) RAW_PYRG_SHI_Signal_mV_Std: Standard deviation of the ventilated thermopile pyranometer voltage signal (Kipp & Zonen CM11) RAW_PYRG_RS_R0_Avg: Average resistance ration RS/R0 of the temperature measurement on the body of the thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_BodyTemp_degC_Avg: Average temperature in °C of the body of the thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_BodyTemp_degC_Min: Average temperature in °Cof the body of the thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_BodyTemp_degC_Max: Average temperature in °Cof the body of the thermopile pyrgeometer (Kipp & Zonen CG1) RAW_PYRG_BodyTemp_degC_Std: Standard deviation in °C of the temperature of the body of the thermopile pyrgeometer (Kipp & Zonen CG1) SYS_SW12_1_ON: Whether the switch #1 for the fans is on or off. SYS_SW12_2_ON: Whether the switch #2 for the fans is on or off. RAW_HV10_RAW_CV50_INVALID_WIND_TOT: Number of invalid wind measurements e.g. due to rain droplets (Campbell Scientific ClimaVue50) RAW_CV50_TILTNS_DEG_AVG: Tilt of instrument in ° towards in N-S direction, digital submission from the all-in one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_TILTWE_DEG_AVG: Tilt of instrument in ° towards in E-W direction, digital submission from the all-in one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_GHI_WM2_AVG: Average global (solar) hemispherical irradiance in W/m2, digital signal measured with a photodiode [low quality] pyranometer in the all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_PRECIPITATION_MM_TOT: Precipitation measured with an droplet counter in the all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_LTNGSTRIKES_CNT_TOT: Number of lightning strikes measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_LTNGDIST_KM_MAX: Maximum distance of lightning strikes measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_LTNGDIST_KM_AVG: Average distance of lightning strikes measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_WIND_MS_AVG: Average wind speed in m/s measured by the all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_WINDDIRECTION_DEG_AVG: Wind direction in ° measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_WINDGUSTMAX_MS_AVG: Maximum wind speed in m/s measured by the all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_AIRTEMPERATURE_DEGC_AVG: Air temperature in °C measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_VAPOURPRESSURE_KPA_AVG: Vapour pressure in kPa calculated based on air temperature and relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_PRESSUREACTUAL_KPA_AVG: Actual pressure in kPa (not reduced to sea level) measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_RELHUMIDITY_FRACTIONAL_AVG: Fractional relative humidity measured with an all-in-one weather sensor (Campbell Scientific ClimaVue50) RAW_CV50_RHT_C_AVG: Internal uncorrected temperature of the all-in-one weather sensor (Campbell Scientific ClimaVue50) Missing data are shown with -9999. Missing data and data gaps are summarized in "PASTFE-RAW_1min-202302030000_202403270000_UTC_missing_data_report.txt"
Keyword(s):
2023; 2024; Barometric pressure; Départment 60; Musée Moulin Brosserie.
MeSH Term(s):
Grants and Funding:
Associated Publication(s):
No Associated Publication Data Available
Supplementary Data:
No Supplementary Data Available
Related Dataset(s):
No Related Dataset Data Available
The National Library of Medicine (NLM) provides information about biomedical datasets. Inclusion on an NLM Web page does not imply endorsement of, or agreement with, the contents by NLM or the National Institutes of Health. Learn more: NLM Web Policies (nih.gov)