Loading...
Loading...
Contributors:
Dataset URI:
10.11583/DTU.30060397.v1This is the data set for the paper [Aske Chris Nilsson, Andrea Roberto Insinga, Salvatore De Angelis, Georgios Potsios and Rasmus Bjørk, Coils in thermomagnetic harvesters - a comparative study, Journal of Magnetism and Magnetic Materials, 657, 174585, 2026]. The DOI for the publication is 10.1016/j.jmmm.2026.174585 .These data are located on the repository at data.dtu.dk, with DOI:10.11583/DTU.30060397 and URL: https://doi.org/10.11583/DTU.30060397 .Figure 3: " Permeability vs temperature"- Experimental characterization data is in the file "Gd_comm_magnetization_table"- The first column is the applied H-field in Tesla. - The remaining columns are magnetization data in A/m, which are categorized by the first row value indicating the temperature in Kelvins.- Values are used to calculate the permeability of Gd by polyfit (function in matlab), which is shown as the solid black curve in the figure. - The remaining dashed lines, and markers are simply based on experimental conditions and calculated parameters (From the heat transfer model). Figure 4: "TMG power vs Time"- Experimental data is in the Excel datafile: "Data_figure_4" This datafile is from a larger dataset previously published: DOI: https://doi.org/10.11583/DTU.26242868- Time (s) is displayed in column "A" and the total power (W) is displayed in column "B". Values are found from row 2-901, but we only use row 481-606 for the plot, where power is produced in steady state. This is time span of 20s-25s - Numerical and Analytical data is in 2 files exported from COMSOL simulations: "Voltage_vs_time_Numerical_with_saturation_Analytical" and "Voltage_vs_time_Numerical_without_saturation_Analytic". - Both files are structured the same way with two columns, where first column is Time (s) and the second column is Voltage (V). - Row 1-2400: Numerical calculated voltage of Coil 1, Row 2401-4800: Numerical calculated voltage of Coil 2, Row 4801-7200: Analytical calculated voltage of both coils. - The time interval is 14.005s to 26.000s and repeats in the row-intervals described above.- The file: "Voltage_vs_time_Numerical_with_saturation_Analytical" contains numerical data for coils 1 and 2 with magnetic saturation.- The file: "Voltage_vs_time_Numerical_without_saturation_Analytic" contains numerical data without magnetic saturation. - Combined resistance of numerical coils in COMSOL is R = 0.66 Ohm - Combined resistance of experimental coils is R = 0.82 Ohm Figure 5: "Average TMG power vs coil winding turns" - Numerical and analytical data is in two files exported from COMSOL simulations: "Pavg_vs_N_without_capacitor_with_saturation.txt" and "Pavg_vs_N_with_capacitor_with_saturation.txt".- Both files are structured the same way with two columns, where first column is Coil winding turns (#) and the second column is Average power (W).- Row 1:82: Numerical calculated average TMG power with saturation, Row 83-164: Analytical solution.- The values of coil turns span from N = 1-8010 and repeats in the row-intervals described above. - The file: "Pavg_vs_N_without_capacitor_with_saturation.txt" contains numerical and analytical calculations of the average power without a load capacitor corresponding to the dashed curves.- The file: "Pavg_vs_N_with_capacitor_with_saturation.txt" contains numerical and analytical calculations of the average power with a load capacitor corresponding to the solid curves.- Black star in the figure corresponds to the experimental measured maximum average TMG power of 3.6mW.Figure 6: "B-H trajectories of the MCM beds"- Numerical data are in the following files exported from COMSOL simulations.- File "N_2000_Without_Magnetic_Saturation.txt" corresponds to N = 2000, without magnetic saturation. - File "N_4000_Without_Magnetic_Saturation.txt" corresponds to N = 4000, without magnetic saturation.- File "N_2000_With_Magnetic_Saturation.txt" corresponds to N = 2000, with magnetic saturation. - File "N_4000_With_Magnetic_Saturation.txt" corresponds to N = 4000, with magnetic saturation. - In all files, first column corresponds to Magnetic field H (A/m) and second column corresponds to Magnetic field density B (T). - Magnetic saturation curve (dotted line) is a linear curve: y = 0.75T + H(A/m)*mu_0- Magnetic constitutive equations (the two grey dashed curves) is two linear curves: y = \mu_0 (\overline{\mu} \pm \Delta_{\mu})H Figure 7: "Relative improvement in average power"- Y-values were obtained as described in section 4 of the manuscript.
Keyword(s):
Coils; Electrical energy generation (incl. renewables, excl. photovoltaics); Magnetism; Magnetothermal energy harvesting; Modeling.
Grants and Funding:
Associated Publication(s):
Supplementary Data:
No Supplementary Data Available
Related Dataset(s):
No Related Dataset Data Available
The National Library of Medicine (NLM) provides information about biomedical datasets. Inclusion on an NLM Web page does not imply endorsement of, or agreement with, the contents by NLM or the National Institutes of Health. Learn more: NLM Web Policies (nih.gov)